What should be paid attention to when using the constant temperature and humidity test chamber

To prevent the constant temperature and humidity test chamber from generating common equipment failures, please show the switching power supply within the rated current range. In order to prevent electric shock accidents or misoperation and common faults, it is not necessary to connect the switching power supply before the installation and wiring are completed. The vent of human body shall be kept smooth to prevent common faults, abnormal posture, reduced service life and fire accidents. If the equipment is damaged or deformed during unpacking, please do not use it. During equipment installation and setting, it is not necessary to let dust, wire knots, iron pins or other objects enter, otherwise incorrect posture or common faults will occur. The wiring must be proper and the grounding device must be carried out. The ungrounded device will lead to electric shock accident, incorrect posture safety accident, abnormal display information or measurement? There is a big deviation.

This constant temperature and humidity test chamber is a non explosion proof product. It is not necessary to use the constant temperature and humidity test chamber in an environment with flammable or combustible vapor. It is strictly forbidden to dismantle, produce, process, update or repair the constant temperature and humidity test box without permission, otherwise there will be a risk of abnormal posture, electric shock or fire accidents. The internal parts of the instrument panel have a necessary service life. In order to continuously and safely apply the instrument panel, please carry out maintenance and repair on time. When reporting this product, please treat it as industrial production and domestic waste.

Please use a wet cloth to scrub the instrument panel. It is not necessary to use ethanol, motor gasoline or other solvents. It is not necessary to splash water on the instrument panel. If the instrument panel seeps into the water, please stop immediately, otherwise there is a risk of electric shock, electric shock or fire accidents. Regularly maintain the terminal screws and fixing brackets, and do not use them when they are loose. During the operation of the instrument panel, the safety factor shall be fully considered before the actual operations such as changing the settings, data signal output, starting, and termination. Incorrect actual operations may damage the constant temperature and humidity test chamber or cause common faults during the operation.