The use of high and low temperature test chamber details must be known

As this testing instrument, the high and low temperature test chamber will immediately cause errors in your testing results in all areas where there are errors during the whole application process. What aspects must we pay attention to when using this high and low temperature test chamber?

As this testing instrument, the high and low temperature test chamber will immediately cause errors in your testing results in all areas where there are errors during the whole application process. So what aspects must we pay attention to when using this high and low temperature test chamber?

During the test, some small key points can not be ignored: because the tailgate is always closed during the operation of the environmental test chamber, we can not see the working conditions in the test room, and we can not see the changes in the position, shape, characteristics, etc. of the tested object, which requires us to pay attention to the position when placing the tested object. The following are the key points of detailed placement conditions:

1. It is required to place the tested object in the high and low temperature test chamber directly under the central government. Neither block the air duct nor stick to the wall.

2. If the tested object is not an independent one, necessary clearance must be reserved between the tested objects.

3. If the high and low temperature test chamber must be plugged in, the wires must be uniformly received at the edge of the inspection hole, and the wires cannot be wound together.

In addition to the above three points, we can not ignore other small details. We need to pay attention when testing products with high and low temperature test chambers to avoid inaccurate test results or other adverse consequences.